ACE GIKEN 技研螺旋点胶阀DPS-110ⅢS

2019-04-22 11:18:02
ACE GIKEN 藤野贸易(广州)有限公司中国总代理. title=""

精工汇-日本工业品一站式采购|MRO综合服务商|工业品采购-精工汇-日本工业品一站式采购|MRO综合服务商|工业品采购
http://mro168.cn/
.ACE GIKEN 技研螺旋点胶阀DPS-110ⅢS

藤野贸易(广州)有限公司代理

高粘度液剂的高精度,能高速涂抹的扩展器。

ACE GIKEN 技研螺旋点胶阀DPS-110ⅢS

高粘度液剂可以高效地快速地吐出。 The high viscosity liquid can be efficiently dispensed at high speed. 因为用螺旋轴的旋转控制高精度吐出可能,纤细的点和线涂布能进行。 Thanks to the rotation control of the screw shaft, you can get a high precision dispensing to a delicate point and lines. 吐出效率大幅度提高。(与传统产品相比最大提高2.5倍的效率) The dispensing efficiency rises greatly.(Max 2.5 time dispensing efficiency has improved compared with old gods. ) 空气,液体积,发热量也大幅度削减。 The place where air and the liquid collect has been decreased greatly, and the calorific value has been reduced,too. 接液部和驱动部的连接采用袋螺母方式。维护性大幅度提高,更加容易使用了。 This model has adopted cap-nut method, so you can maintain easy. 设置了专用的更换式螺丝刀,改善了排放不均、耐久性和消耗零件的低成本化,并在高维度两立。 Because the screw liner of the exchange type was adopted, the improvement of the stability, the improvement of durability, and lowering the cost in wear-out parts warts warts warts warts warthe stability, the stability, the istability, the imhe imhe impreiere able to be done 是螺旋式扩展器的新基准模型。 This is a new benchmark model at a screw type dispenser.

スクリューバルブコントローラー
Screw valve contoroller
SA-110Ⅲ
コントローラー付属品
Controller accessories
フットスイッチ
Foot switch
ウレタンチューブ(W)φ6×φ4×2m×1本
Urethane tube(W)φ6×φ4×2m×1set
スクリューバルブ
Screw valve
SB-110ⅢS
シリンジU (落シ蓋、先端キャップ付)
Syringe U
30ml×10式 ※5・10・50mlに変更可能
30ml×10sets ※It is changeable to 5.10.50ml
シリンジホルダー
Syringe holder
30ml用 ※5・10・50mlに変更可能
for 30ml ※It is changeable to 5.10.50ml
ルアーアダプター
Lure adapter
M6
スタンドセット
Stand set
ベース、ポール、スクリューバルブホルダーの3点セット
Base、Pole、Screwvalve holder
ノズル
Nozzle
金属ノズル(サイズ指定)×20本
Metal nozzle(chosen size)×20sets
ACE GIKEN 藤野贸易(广州)有限公司中国总代理.

精工汇-日本工业品一站式采购|MRO综合服务商|工业品采购-精工汇-日本工业品一站式采购|MRO综合服务商|工业品采购
http://mro168.cn/
.
电话咨询
邮件咨询
在线地图
QQ客服